Filter By:
Tools & Tuning
$15.99 - $39.99
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F).
- Recommended iron temp: 140°C (284°F).
- Replaces the CH7X.
- -2°C to -8°C (28°F to 18°F).
$15.99
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F).
- Recommended iron temp: 130°C (266°F).
- Replaces the CH8X.
- -4°C to +4°C (25°F to 39°F).
$79.99
Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.
- Durable glide wax
- A favorite for classic long-distance skiing
- Hard wax
- Can be used with roto wool
- For all skiing
- Ski wax
$79.99
Designed specifically for longer distances on newer and clean snow. Excellent in warm conditions, but also very competitive at lower temperatures. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.
$156.00
Lightweight and tailor-made for SWIX tables!
Cross Country profile in plastic, To use with our wax tables, For all skiers, Lightweight and stable.
Thermo plastic profile for cross country skis. Fits into waxing tables T0076, T0076-2, T00754, T0075W. Same profile both in the front and back. Includes holder for fixing the binding. Suitable for both classic and skating skis in lengths from 170-210 cm. Lightweight and very stable to work with. Weight: 1.4 kg/3.2 lbs.
$15.00
Synthetic cork for kick wax.
This synthetic cork has a higher density than a regular synthetic cork. For racing.
$109.99
Quality paper for all-round use. X-large roll, 200 m/650 feet.
$134.99
For double roto-brushes!
Roto handle/cover/driveshaft, For roto brushing, For everybody who uses roto brushes, easy to use.
Roto handle with hexagonal drive shaft 140 mm and protection cover. For 140 mm brushes and double Roto brushes 70 mm + 70 mm.
$219.99
Practical wax brush with two brushes on one axle. The most popular Roto brush in racing circles. Horsehair is used first to prevent the wire brush from clogging, then finish with the wire brush. It is recommended to lightly "dull" the wire brush with sandpaper #100 before using for the first time. 140 mm wide. 70 mm horsehair brush and 70 mm wire brush.
- Roto brush
- For brushing glide wax
- For all ski waxers
- Very practical combo brush
$40.00
Small, handy bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure.
- Bronze brush
- For brushing glide wax
- For those who want a better skiing experience
- Handy size
$22.99
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality.
- For training and competitions
- Fluorine free and 100% biodegradable
- Thoroughly tested on several types of conditions
$89.99
Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the brush to the handle. Move it in overlapping motions from the tip to the back.
$129.99
Racing favorite!
High quality roto fleece. Effectiv when there are many skis or boards to prepare.
The Fleece-Roto improves Cera F Powder and Cera F Solid performance. Apply the Cera powder to the base with a wax iron first. The Fleece-roto should be used a couple of times to get optimal performance. NB! Use separate Fleece brushes for each type of Cera F. 100 mm wide.
$189.99
Meriono wool 140mm version, 20mm long wool hairs. Perfect for alpine and snowboard. A new and revolutionary way of applying waxes without the need of a waxing iron. The method is tailor-made for harder waxes, such as the Marathons and is applied onto the skis in two simple steps: Start by applying the wax to the roto brush by touching the wax to the wool for a few seconds while running the drill at a speed of approx. 1.500 RPM. Then, use the roto brush on the base with a speed of approx. 1.500 RPM. Use light pressure. Start from the tip and move back and forth approx. a foot at a time towards the tail (three times applying the wax and three times polishing).
- Roto wool
- Trendy waxing technique
- Used in World Cup
- Perfect with fluoro free ski wax
- Easy to use
- No heat needed
$105.00
Ultra-fine steel brush which is often used as a second brush after scraping skis.
- Fine wire brush
- For initial brushing of glide wax
- For experienced ski waxers
- Ergonomically designed
$219.99
Efficient solution when prepping several pairs of skis.
- 100 mm width
- Roto steel brush
$15.00
Practical combi cork for polishing Cera F and liquid topping.
High quality natural cork with felt/ for application of Cera F.
$15.99
Efficient and fast solution during snowboarding competitions.
13.2 cm x 4.3 cm x 3.2 cm
$21.00
Medium coarse Fibertex. Silicon carbide abrasive. Orange. 3 Pads. 110 mm x 150 mm. To refresh and open the ski base. Takes away hardened oxidized layer on bases that has not been treated with wax for some time. Also used to remove abraded polyethylene micro fibers left from skiing or snowboarding on abrasive snow. Finish with White Fibertex (T0266).
$19.99
Extra-fine Fibertex. Flint abrasive particles. White. Pack of three sandpapers 110 x 150 mm. Used on new skis and newly-structured skis to remove the smallest polyethylene microfibers. Polishes the base completely smooth and even. Also used as a final finish after using Grey Fibertex (T0264N) or Violet Fibertex (T0266N).
- Nylon pad with abrasive particles
- Removes microhairs from the base
- For all ski waxers
- Gentle and effective
$21.99
Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth.
- Pack of three sandpapers 110 x 150 mm
- Aluminum oxide abrasive particles
$180.00
Structure tool with ball bearings/rollers for easy rolling. Strong and stable holder. White arrow shows direction and correct insertion of the roller. Supplied as standard with 0.5 mm broken V-roller. Structure grooves will disappear on the next waxing with a waxing iron. Great for junior racing and for cross-country marathons The rollers are easy to replace.
- Structure roller turned in brass
- Ball bearings on the rollers for easier rolling
- The diameter of the structure roller is 20 mm
$59.99
Box for storing and transporting SWIX Roto brushes.
- Empty case
- For storing Roto brushes
- For keen ski waxers
- Solid and with a smart layout
$160.00
Good wax iron for alpine and cross country skis.
110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).
$230.00
Good wax iron for alpine and cross country skis.
110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).
$13.99
It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.
$6.99
Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.
$7.99
Practical groove scraper. Handy format. Practical groove scraper for wax removal.
$95.00
TS5B - Top Speed 5 Black. Excellent dry-friction properties!
The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions.
The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F)