Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$149.99
10g [5g/wax type] The ultimate race pairing; one puck, two wax types. High Quality glide wax, use on ski base, easy application. Cover all snow conditions in each temperature range with the ULL*A Glide Wax Race Line!
$149.99
90 ml (3 fl oz.) Ulla Liquid Race Speed was developed with top cross country and alpine performers in mind. All Ulla Liquid Race Speed waxes are great alone or as a base or top layer used in tandem with Ulla Glide WAXES. The best part of our liquid waxes (other than their speed) are that they are naturally dirt repellent; keeping your skis clean as you go.
$24.99
All-round brush for brushing all kinds of hot wax.
$69.99
This fine horse-hair brush is perfect for brushing even the finest structures.
$40.00
Universal liquid wax for all types of snow and temperatures. - Based on natural raw materials - Biodegradable - Improves sliding properties and cares for the base - Quick and easy to apply - With sponge applicator - Comfortable pocket size to go and wax en route - Also used as rust protection for ski edges No shipping to Alaska (please buy locally). - Comes in 75/ 100/ and 200ml sizes.  100ml size has polishing pad. No shipping to Alaska (please buy locally).
$9.99
Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.
$15.00 - $16.00
For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.
$15.99
Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$35.99
Fluor Free Hydrocarbon wax -4°C to +4°C. Good training wax. Easy to warm in. Good in dry conditions. - A soft wax covering both sides of the freezing point - Great for base prep and training use Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$30.00
Waxing apron that belongs in every waxing cabin. Also works great as a barbeque apron.
$19.99
Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.
$24.99
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$74.99 - $272.00
The HFX series is great gliders for competition that works well in fresh, old or man made snow. Perfect underlayer for top coats Great water repellency properties Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). HF10X is made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm.
$74.99
The HFX series is great gliders for competition that works well in fresh, old or man made snow. Durable wax for cold condtions Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last seasons. Cross country is also gradually discovering HF05X and we see more and more servicemen who prefer this wax in cold conditions. The lower melting point compared to the 4 series makes the 5 series easier to work with, without sacrificing the good glide properties it has in cold conditions. For fresh, old or man made snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05X can be used as a race wax alone or as a base for Cera F powder, such as FC05X.
$74.99
The HFX series is great gliders for competition that works well in fresh, old or man made snow. An undisputed favorite in cold conditions Hard and durable, yet easy to apply A favorite both in alpine and XC Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp.: 145°C (293°F). Our std. HF6 recipe has proven to be too good to be dropped and is therefore continued as HF06X in the Cera Nova X range. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF06X can be used as a race wax alone, but is often used as a base for Cera F, such as FC06X and HVC Cold.
$74.99
The HFX series is great gliders for competition that works well in fresh, old or man made snow. A great wax for typical winter conditions Perfect underlayer for top coats We do not currently ship Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). HF07X is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. For fresh,old or man made snow. Good in clean snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF07X can be used as a race wax alone, but is often used as a base for Cera F, such as FC07X and HVC Cold.
$74.99 - $272.00
The HFX series is great gliders for competition that works well in fresh, old or man made snow. An undisputed favorite in warm conditions A favorite in nordic disiplines Perfect underlayer for top coats Temperature range from -4°C to +4°C (25°F to 39°F). Recommended iron temp.: 130°C (266°F). HF08X is a continuation of the classic HF8 which is a legendary wax within racing. Over the last decade this wax has contributed to a numerous of Olympic and WC medals in all ski disciplines. Its softness and high fluoro content makes it perfect in conditions on both sides of the freezing point. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF08X can be used as a race wax alone, but is often used as a base for Cera F, such as FC08X and HVC Warm.
$39.99
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$39.99 - $99.95
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).
$39.95 - $99.95
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions
$39.95 - $99.95
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$23.00
Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.
$45.00
Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.
$22.00
Great kick in icy conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range 0°C to -12°C (32°F to 10°F). For coarse snow/hard tracks and icy conditions. Excellent on hard-packed coarse cold snow, but can also be an alternative to KX20 as base klister. It is easier to apply than KX20. In racing KX30 is often used as the "in-between" klister on top of KX20, but rarely used as the last layer due to the preparation of the tracks. For general skiing on cold mornings after it has been wet the day before, it is a highly useful product. Scraper included.
$20.00
Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.
$20.00
Great grip in very wet conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range +2°C to +15°C (36°F to 59°F). Wet snow klister. Used when the snow has a high water content such as slush, and the air temperature is well above freezing. Late spring klister. Scraper included.
$27.99
The LFX series is great gliders for training and competition with very good glide properties. Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp.: 155°C (311°F). A cold wax for dry friction conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance
$27.99
Air -8°C to -14°C (18°F to 7°F)The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.iron temp: 150°C (311°F)
$69.99
The LFX series is great gliders for training and competition with very good glide properties. Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). LF07X performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. When used as a base for Cera F, we recommend the new FC07X powder.
Page 1 of 3 Next page