Tools & Tuning

Cleans integrated skins in a gentle way without affecting the skin glue. Restores the properties of the skin and increases its efficiency. To be used after skiing. - Can also be used for backcountry skiing - Easy to use - Apply after skiing - Must have when using skin skis - Fluoro free ski wax - Swix ski wax

Fluor Free Hydrocarbon wax -4°C to +4°C. Good training wax. Easy to warm in. Good in dry conditions. - A soft wax covering both sides of the freezing point - Great for base prep and training use Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Small, handy bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. - Bronze brush - For brushing glide wax - For those who want a better skiing experience - Handy size

Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.

Top layer kick wax with high fluoro content. Better glide and easier skiing. Reduces risk for icing. Excellent when high humidity. To be used as top layer.

Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling

Box for storing and transporting SWIX Roto brushes. - Empty case - For storing Roto brushes - For keen ski waxers - Solid and with a smart layout

Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the brush to the handle. Move it in overlapping motions from the tip to the back.

Ultra-fine steel brush which is often used as a second brush after scraping skis. - Fine wire brush - For initial brushing of glide wax - For experienced ski waxers - Ergonomically designed

Quality paper for all-round use. X-large roll, 200 m/650 feet.

Racing favorite! High quality roto fleece. Effectiv when there are many skis or boards to prepare. The Fleece-Roto improves Cera F Powder and Cera F Solid performance. Apply the Cera powder to the base with a wax iron first. The Fleece-roto should be used a couple of times to get optimal performance. NB! Use separate Fleece brushes for each type of Cera F. 100 mm wide.

For double roto-brushes! Roto handle/cover/driveshaft, For roto brushing, For everybody who uses roto brushes, easy to use. Roto handle with hexagonal drive shaft 140 mm and protection cover. For 140 mm brushes and double Roto brushes 70 mm + 70 mm.

Lightweight and tailor-made for SWIX tables! Cross Country profile in plastic, To use with our wax tables, For all skiers, Lightweight and stable. Thermo plastic profile for cross country skis. Fits into waxing tables T0076, T0076-2, T00754, T0075W. Same profile both in the front and back. Includes holder for fixing the binding. Suitable for both classic and skating skis in lengths from 170-210 cm. Lightweight and very stable to work with. Weight: 1.4 kg/3.2 lbs.

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Structure tool with ball bearings/rollers for easy rolling. Strong and stable holder. White arrow shows direction and correct insertion of the roller. Supplied as standard with 0.5 mm broken V-roller. Structure grooves will disappear on the next waxing with a waxing iron. Great for junior racing and for cross-country marathons The rollers are easy to replace. - Structure roller turned in brass - Ball bearings on the rollers for easier rolling - The diameter of the structure roller is 20 mm

Meriono wool 140mm version, 20mm long wool hairs. Perfect for alpine and snowboard. A new and revolutionary way of applying waxes without the need of a waxing iron. The method is tailor-made for harder waxes, such as the Marathons and is applied onto the skis in two simple steps: Start by applying the wax to the roto brush by touching the wax to the wool for a few seconds while running the drill at a speed of approx. 1.500 RPM. Then, use the roto brush on the base with a speed of approx. 1.500 RPM. Use light pressure. Start from the tip and move back and forth approx. a foot at a time towards the tail (three times applying the wax and three times polishing). - Roto wool - Trendy waxing technique - Used in World Cup - Perfect with fluoro free ski wax - Easy to use - No heat needed

Practical wax brush with two brushes on one axle. The most popular Roto brush in racing circles. Horsehair is used first to prevent the wire brush from clogging, then finish with the wire brush. It is recommended to lightly "dull" the wire brush with sandpaper #100 before using for the first time. 140 mm wide. 70 mm horsehair brush and 70 mm wire brush. - Roto brush - For brushing glide wax - For all ski waxers - Very practical combo brush

Efficient solution when prepping several pairs of skis. - 100 mm width - Roto steel brush

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.

For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.

All-round brush for brushing all kinds of hot wax.

Universal liquid wax for all types of snow and temperatures. - Based on natural raw materials - Biodegradable - Improves sliding properties and cares for the base - Quick and easy to apply - With sponge applicator - Comfortable pocket size to go and wax en route - Also used as rust protection for ski edges No shipping to Alaska (please buy locally). - Comes in 75/ 100/ and 200ml sizes.  100ml size has polishing pad. No shipping to Alaska (please buy locally).

This fine horse-hair brush is perfect for brushing even the finest structures.

10g [5g/wax type] The ultimate race pairing; one puck, two wax types. High Quality glide wax, use on ski base, easy application. Cover all snow conditions in each temperature range with the ULL*A Glide Wax Race Line!

90 ml (3 fl oz.) Ulla Liquid Race Speed was developed with top cross country and alpine performers in mind. All Ulla Liquid Race Speed waxes are great alone or as a base or top layer used in tandem with Ulla Glide WAXES. The best part of our liquid waxes (other than their speed) are that they are naturally dirt repellent; keeping your skis clean as you go.

Apply Ulla glide wax by hand with this full kit designed to work at home or on the trail head. Includes: Ull*a Glide Waxes (4) - Blue, Violet, Red, Yellow Ull*a Base Cleaner/Conditioner Ull*a Tools: - Hand Tool - Horsehair Brush - Extra wool - Extra cork