Tools & Tuning

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.

Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Efficient and fast solution during snowboarding competitions. 13.2 cm x 4.3 cm x 3.2 cm

Fantastic kick in typical winter conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Brilliant grip. - New fallen snow -2°C to -10°C (28°F to 14°F). - Old fine-grained snow -5°C to -15°C (23°F to 5°F). Another truly classic Swix wax. To be used on moderate cold snow when skiing is at its best. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Synthetic cork for kick wax. This synthetic cork has a higher density than a regular synthetic cork. For racing.

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt/ for application of Cera F.

Quality paper for all-round use. Small roll, 20 m.

Supreme in extreme cold conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow -12°C to -25°C (10°F to -12°F). - Old fine-grained snow -15°C to -30°C (5°F to -22°F). As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Brilliant kick wax for cold conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow -8°C to -15°C (18°F to 5°F). - Old fine-grained snow -10°C to -18°C (14°F to 0°F). The well-known cold snow wax, used for more than fifty years, has been modernized several times with new components. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Great kick just below zero! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C to -3°C (32°F to 27°F). - Old fine-grained snow -2°C to -6°C (28°F to 21°F). A very frequently used wax, both in racing and touring. When Blue Extra becomes somewhat slippery, a thin layer of Violet Special probably is the right wax. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.

New fallen snow 0°C to +1°C (32°F to 34°F). Old fine grained snow 0°C to -2°C (32°F to 28°F). For moist new snow up to +1°C (34°F) and down to -2°C (28°F) in older more transformed granular snow. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.

Practical groove scraper. Handy format. Practical groove scraper for wax removal.