Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$20.99
Extra-fine Fibertex. Flint abrasive particles. White. Pack of three sandpapers 110 x 150 mm. Used on new skis and newly-structured skis to remove the smallest polyethylene microfibers. Polishes the base completely smooth and even. Also used as a final finish after using Grey Fibertex (T0264N) or Violet Fibertex (T0266N). - Nylon pad with abrasive particles - Removes microhairs from the base - For all ski waxers - Gentle and effective
$21.00
Medium coarse Fibertex. Silicon carbide abrasive. Orange. 3 Pads. 110 mm x 150 mm. To refresh and open the ski base. Takes away hardened oxidized layer on bases that has not been treated with wax for some time. Also used to remove abraded polyethylene micro fibers left from skiing or snowboarding on abrasive snow. Finish with White Fibertex (T0266).
$21.99
Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth. - Pack of three sandpapers 110 x 150 mm - Aluminum oxide abrasive particles
$22.00
Great kick in icy conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range 0°C to -12°C (32°F to 10°F). For coarse snow/hard tracks and icy conditions. Excellent on hard-packed coarse cold snow, but can also be an alternative to KX20 as base klister. It is easier to apply than KX20. In racing KX30 is often used as the "in-between" klister on top of KX20, but rarely used as the last layer due to the preparation of the tracks. For general skiing on cold mornings after it has been wet the day before, it is a highly useful product. Scraper included.
$22.99
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions
$23.00
Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.
$23.99
Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.
$23.99
Extremely durable base wax! Basebinder kick wax for transformed and old snow. Improved wear on kick wax. A durable base wax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.
$24.99
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$27.99
The LFX series is great gliders for training and competition with very good glide properties. Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp.: 155°C (311°F). A cold wax for dry friction conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance
$27.99
Air -8°C to -14°C (18°F to 7°F)The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.iron temp: 150°C (311°F)
$29.99
Fluorfree kick wax for the cold to extremely cold ski trips. Light blue kick wax designed for dry and cold to extremely cold conditions. - Fluoro free kickwax - For colder ski trips - Made for racing - For new and new fallen fine-grained snow from -8°C to -16°C (18°F to 3°F). - Old/partly transformed snow from -12°C to -20°C (10°F to -4°F). Light blue kick wax designed for dry and cold to extremely cold conditions. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.
$29.99
Perfect for "real" winter conditions. Fluoro free, blue kick wax for cold and dry winter conditions. - Fluror free kickwax - For racing - For new and new fallen fine-grained snow from -4°C to -10°C (25°F to 14°F). - Old/partly transformed snow from -5°C to -14°C (23°F to 7°F). Blue kick wax is designed for dry and cold winter conditions. A safe choice for normal midwinter inland conditions. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.
$29.99
Allround, fluoro free kickwax for normal winter conditions. Fluoro free, purple-blue kick wax for normal winter conditions well below the freezing point. - Fluoro free kickwax. - A winner in the winter trails. - For racing - For new and new fallen fine-grained snow from -1°C to -5°C (30°F to 23°F). - Old/partly transformed snow from -3°C to -8°C (27°F to 18°F). Purple-blue kick wax is designed for normal winter conditions well below the freezing point. An obvious “next step” if VP40 does not provide a safe kick. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.
$30.00
Waxing apron that belongs in every waxing cabin. Also works great as a barbeque apron.
$30.00
Problem solver. Backcountry and alpine touring skin wax. Skin Wax for backcountry and alpine touring. To be applied on skins to prevent icing up & provide easier glide. Dirt repellent. Great for all snow conditions. Aerosol with applicator. 5 fl. oz. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
$30.00
For wet and moist new snow. Works also on wet transformed snow down to 0°C (32°F). Apply thicker if very wet.
$35.99
Fluor Free Hydrocarbon wax -4°C to +4°C. Good training wax. Easy to warm in. Good in dry conditions. - A soft wax covering both sides of the freezing point - Great for base prep and training use Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$39.95 - $99.95
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions
$39.95 - $99.95
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$39.99
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$39.99 - $99.95
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).
$40.00
Small, handy bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. - Bronze brush - For brushing glide wax - For those who want a better skiing experience - Handy size
$45.00
Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.
$50.00
Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling
$59.99
Box for storing and transporting SWIX Roto brushes. - Empty case - For storing Roto brushes - For keen ski waxers - Solid and with a smart layout
$69.99
The LFX series is great gliders for training and competition with very good glide properties. Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). LF07X performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. When used as a base for Cera F, we recommend the new FC07X powder.
$74.99 - $272.00
The HFX series is great gliders for competition that works well in fresh, old or man made snow. Perfect underlayer for top coats Great water repellency properties Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). HF10X is made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm.
$74.99
The HFX series is great gliders for competition that works well in fresh, old or man made snow. Durable wax for cold condtions Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last seasons. Cross country is also gradually discovering HF05X and we see more and more servicemen who prefer this wax in cold conditions. The lower melting point compared to the 4 series makes the 5 series easier to work with, without sacrificing the good glide properties it has in cold conditions. For fresh, old or man made snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05X can be used as a race wax alone or as a base for Cera F powder, such as FC05X.