Parts & Accessories

Cargo Straps

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

LOAD AND GO. Giant offers a complete line of racks to meet your cycling needs. Choose the quick access and convenience of the MIK rack system or the simplicity and classic feel of the Racktime rack deck—both pair perfectly with your on-bike carrying systems. - Designed for the MIK system - One size - Please contact us for questions regarding your E-Bike's compatibility

Round Monostay Adapter - Hardware included

- Soft non-slip webbing material - Triple strap strength to hold down cargo - Double vinyl hooks for secure mounting - 24-inch length works with most racks

- Newly designed to keep the basket lower and closer to the bike - Compatible with all Electra QR basket models

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack

Bungee-style tie down straps for securing large and/or awkward loads. CONSTRUCTION • Heavy-duty elastic with T6 hardened aluminum hooks ADDED BENEFIT • Pair with panniers for convenient top loading option

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Replacement hardware for Axiom rear racks. - Includes upper arms and mounting hardware

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

A Bolt-on adapter to convert most racks for use with the secure and lightweight G2 Clip-on system. The G2 mounting system allows for quick, secure and easy attachment and removal of bags and panniers. Durable aluminum construction with versatile mounting hardware included.

Replacement bungee cords for your Basil Pet Carrier. Intended for use with Electra Basil Pet Carrier Sold in pairs

For adventures on and off two wheels. Designed for 31.8mm handlebars Check handlebar diameter before use Strap and pin not included

Assemble your cargo rack properly with genuine replacement parts. Details: - Original equipment specifications - For use with adjustable Electra MIK rear rack - Includes all mounting hardware

Electra's Wicker Basket Bracket Kit offers additional support to keep your Electra Wicker Basket (sold separately) securely in place, which allows you to carry even heavier items, such as books and groceries. The steel bracket attaches directly to your bike via the headset and the basket simply bolts to the bracket. You even get 2 brackets, one for standard 1-inch, and one for oversize 1 1/8-inch headsets.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

The Pet Cover for the DairyMan Rear Basket will certainly be the perfect pet carrier for your bicycle. The Pet Cover easily attaches to the DairyMan Rear Basket using a drawstring. It also has a full zip opening so you can easily put in and take out your small pet. The top of the Pet Cover is made with a mesh material for breathability and constant airflow. Most importantly, the Pet Cover comes with a bottom pad for your pet to have a comfy ride! - Size: 15" x 13" (fits most baskets of this size)

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

This sturdy handlebar provides stability for those seated on the rear rack of your RadWagon. Mounted to the bike’s frame behind the driver’s seat, the Deckhand is perfect for added peace of mind for you and your RadWagon's passenger. It can also be mounted to the back of the rear rack as a backrest or as a method to contain cargo. - Ergonomic hold geometry - Aluminum construction with durable matte-black finish - Stainless-steel hardware included - Can be used in tandem with one Thule Yepp Maxi Child Seat Compatibility: RadWagon 5 RadWagon 4